Biloxi gets about 64 to 65 inches of rain a year, nearly double the U.S. average, so most Biloxi homes need 6-inch seamless gutters with 3x4-inch downspouts. That pairing moves about 40% more water than a standard 5-inch system and stops the overflow that rots fascia and washes out foundations during Gulf Coast downpours.
Gutter problems Biloxi homeowners call us about
Biloxi rain does not fall gently. Summer storms and tropical systems drop inches of water in a few hours, and a gutter system that works fine in a drier state fails here. These are the problems we see most often in Biloxi neighborhoods, from the older homes near Downtown and Old Biloxi to the subdivisions in Woolmarket and North Biloxi.
Water pouring over the edge
When rain sheets over the front of the gutter instead of draining, the gutters are either clogged, too small for the roof, or hung with the wrong pitch. In Biloxi downpours, undersized 5-inch gutters overflow even when they are perfectly clean.
Leaks at corners and seams
Sectional gutters are joined every 10 feet, and every joint depends on sealant. Gulf heat and storm cycles age that sealant fast. Leaks drip onto siding, stain walls, and soak the fascia board behind the gutter.
Sagging or pulling away
Gutters full of wet pine needles and storm debris get heavy. Hangers spaced too far apart, or spikes that have worked loose, let the run sag. Water then pools in the low spots instead of flowing to the downspout.
Rotten fascia and soffit
Overflowing and leaking gutters keep the wood at your roof edge wet. On Biloxi's older housing stock, that means fascia rot that a new gutter cannot grip until the damaged wood is repaired or replaced.
Washouts at the foundation
When gutters overflow or downspouts dump water at the base of the house, soil erodes, mulch washes out, and water pools against the slab. Over a few storm seasons, that pooling can crack walkways and drive moisture problems inside.
Pine needles and storm debris
Longleaf pines drop needles all year, and tropical weather adds leaves, twigs, and roof grit in a single weekend. Needles mat together and dam the gutter, which is why cleaning and guard choices matter as much as the gutter itself here.
If you are seeing any of these, start with our gutter repair in Biloxi page. Small leaks and sagging runs are often fixable without replacing the whole system.
That is the whole job of gutter installation in Biloxi, MS: catch what the roof sheds and put it where it cannot hurt the house.
What a correctly sized gutter system protects
The gutter is the cheapest part of the system it protects. When Biloxi rain is captured and carried away properly, four expensive things stay dry and intact:
Your foundation
Overflow dumps roof water at the slab edge, where it erodes soil and invites settling. A sized system with downspouts discharging away from the house prevents that foundational decay.
Your landscaping and soil
A roof sheds thousands of gallons in a Gulf storm. Directed into downspouts, it leaves your beds alone. Dumped over the edge, it carves trenches, washes out mulch, and drowns plantings.
Your siding, free of mold and mildew
Constant overflow keeps siding wet, and wet siding in Mississippi humidity grows mold and mildew and peels its paint. Dry walls stay painted and clean.
Your sidewalks and driveway
Water pooling where gutters fail, the flood pockets you see after every storm, undermines walkways and drives the settling and cracking that ends in trip hazards and concrete work.
Our focus: seamless gutters, formed on site
Most of what we install in Biloxi is seamless. A seamless gutter is rolled from a continuous coil of metal by a machine at your home and cut to the exact length of each run. The only joints are at corners and at the downspout outlets, so there are far fewer places for a leak to start.
That matters more here than in most places. Seam sealant is the first thing to fail on a sectional system, and Biloxi gives it heat, humidity, salt air, and repeated storm soaking to work against. Seamless aluminum gutters also last longer: Sectional aluminum lasts about 20 years; a seamless system runs around 25 years with basic maintenance.
Read the full breakdown on our seamless gutter installation in Biloxi, MS page, including how we size a system for your roof and when a half-round or copper system makes sense for a historic home near the beachfront.
Rather talk than type? We answer our own phone.
Call (228) 888-8061Gutter services in Biloxi, MS
Seamless Gutter Installation
New seamless systems formed on site, sized to your roof, in aluminum, steel, and copper.
Seamless installation →Gutter Repair
Leak sealing, re-pitching, hanger replacement, and storm damage repair for existing systems.
Gutter repair →Gutter Replacement
Full tear-off and replacement when a system is rusted, sagging throughout, or at the end of its life.
Gutter replacement →Gutter Guard Installation
Micro-mesh and screen guards that keep out pine needles and storm debris without choking water flow.
Gutter guards →Gutter Cleaning
Debris removal, downspout flushing, and a condition check. Biloxi homes under pines need it two to four times a year.
Gutter cleaning →Costs and Estimates
Real price ranges by material and size, what drives a quote up or down, and how our written estimates work.
Gutter installation cost →See the full list, including downspout work, drainage, and commercial gutters, on our gutter services page.
Materials and sizes: what we recommend on the Gulf Coast
Aluminum is the default for most Biloxi homes. It does not rust in salt air, it is light enough for long seamless runs, and it is the most affordable metal. Installed seamless aluminum typically costs $6 to $13 per linear foot. Galvanized and galvalume steel cost more and are stronger, a reasonable pick for commercial buildings. Copper is the premium choice, common on historic and beachfront homes; it can last 50 years and costs far more per foot. Vinyl is the budget option, but Gulf heat makes it brittle and it is the shortest-lived material we see.
On size, this is where local conditions decide. A 5-inch K-style gutter drains a roof area of roughly 5,520 square feet at one inch of rain per hour; a 6-inch K-style handles about 7,960 square feet, around 40 to 44 percent more. Biloxi storms regularly beat one inch per hour. That is why we fit most homes with 6-inch gutters and oversize 3x4-inch downspouts, and why the upgrade usually adds only about $1 to $3 per linear foot over 5-inch. Our 5-inch vs 6-inch gutters guide shows the math.
Downspouts and drainage
A gutter system fails at the downspouts as often as at the trough. Too few downspouts, or standard 2x3-inch downspouts behind oversize gutters, and the system backs up in exactly the storms it was bought for. As a rule, a home needs a downspout about every 30 to 40 feet of gutter, and most Biloxi homes need four to five.
We install and replace downspouts, add downspouts where runs are too long, and fit splash blocks and underground drainage lines that carry water away from the foundation instead of dumping it at the base of the wall. If your yard ponds where the downspouts discharge, tell us when you call. Moving that water is part of the same job, not an extra trade.
One call, one visit, one written number. That is the whole sales process.
Call (228) 888-8061How it works
Step 1: Call or send the form
Call (228) 888-8061 and tell us what the water is doing: overflowing, leaking, sagging, or a full new install. We schedule a visit at a time that suits you.
Step 2: On-site measurement and written estimate
We measure every run, check the fascia for rot, count downspout locations, and talk through size and material with the actual numbers in front of you. You get a written estimate with the full price. No work starts until you say yes.
Step 3: Install and walkthrough
Most homes are finished in a day. We form seamless runs on site, set hangers and pitch, fit downspouts, seal corners, test with water, and walk the property with you to check every run before we leave.
Water coming over your gutters in Biloxi storms?
That is usually a sizing, pitch, or clog problem, and all three are fixable. Get the measurement first, then decide.
Call (228) 888-8061From our work: forming, fitting, and finishing
Why Biloxi homeowners call us
- Sized for Biloxi rain, not a national chart. 64 to 65 inches of rain a year and hurricane-season downpours are the design starting point, so 6-inch gutters and 3x4 downspouts are our default recommendation where the roof needs them.
- Formed on site. Seamless runs are cut to your exact roofline in your driveway, not pieced together from 10-foot sections.
- Written estimate before work. The price is measured, itemized, and agreed before installation day. If we find rotten fascia once the old gutter comes off, we show you before repairing it and price it separately.
- Honest repair advice. If resealing corners and re-hanging one run solves your problem, that is the quote you get. We would rather fix a gutter than sell a system you do not need.
- Local service area, stated plainly. We work in Biloxi only, across 39530, 39531, and 39532, so the advice on this site is about Biloxi weather, Biloxi housing, and Biloxi trees, not a template copied across fifty cities.
Questions about your roofline? The measuring tape settles most of them.
Call (228) 888-8061Service area: Biloxi, Mississippi
We install and repair gutters across Biloxi, including Downtown and Old Biloxi (39530), East Biloxi and the Keesler area, West Biloxi and Edgewater Park near Edgewater Mall (39531), and North Biloxi and Woolmarket (39532). Older homes near Beach Boulevard and the Biloxi Lighthouse often need fascia checks and, on historic properties, half-round or copper profiles. Newer subdivisions north of I-10 more often need a size upgrade, because builder-grade 5-inch gutters are undersized for the roofs they drain. See the full breakdown on our Biloxi service areas page.
Gutter services in your part of Biloxi
Every area of the city gets its own page, because the work genuinely differs by neighborhood: Downtown & Old Biloxi (39530) for historic homes and salt air, West Biloxi & Edgewater Park (39531) for replacement-age systems, and North Biloxi & Woolmarket (39532) for new subdivisions under the pines.
Commercial and multi-unit gutter work
Most of our work is houses, but the same crew fits box gutters and larger downspouts on Biloxi storefronts, small apartment buildings, churches, and rental portfolios. Commercial work is quoted per building after a site visit, because rooflines, access, and drainage runs vary too much for a per-foot guess. Landlords with several Biloxi properties can put cleaning and inspections on one schedule and get one itemized bill, which beats chasing three handymen across two ZIP codes.
Talk it over with the crew. One call gets you a measured, written estimate.
Call (228) 888-8061Most weeks we are hanging seamless runs somewhere between the beach and Woolmarket, because gutter installation Biloxi MS homeowners actually need is sized for this rain, not for a catalog photo.
Licensing and warranties, stated plainly
How licensing works for gutters in Mississippi
Mississippi has no gutter-specific license, and anyone who shows you one is showing you paper that does not exist. What does apply: the Mississippi State Board of Contractors (MSBOC) requires a residential remodeling license for jobs over $10,000, which most gutter projects fall under, and the City of Biloxi requires a business privilege license to operate here. We work inside those rules, and our business documentation is available at your estimate, just ask.
20-year material warranty
The painted aluminum coil we install carries a 20-year limited manufacturer warranty on its finish. It is a real document with real terms, and you get the details in writing with your estimate, not a verbal promise in the driveway.
5-year workmanship guarantee
If a seam we sealed leaks, a corner we fitted opens, or a hanger we set lets go within five years, we come back and make it right. That is our own guarantee on our own work, and it is written into your paperwork.
Frequently asked questions
How much does gutter installation cost in Biloxi, MS?
Seamless aluminum typically costs $6 to $13 per linear foot installed, about $10 a foot on the average Biloxi home. Most Biloxi homes need 100 to 200 linear feet. Extras like gutter guards, extra downspouts, and fascia repair change the total, which is why we measure on site and give a written estimate. See our full Biloxi gutter installation cost guide.
Should I get 5-inch or 6-inch gutters in Biloxi?
For most Biloxi homes, 6-inch. A 6-inch K-style gutter moves about 40 percent more water than a 5-inch, and Biloxi gets roughly 64 to 65 inches of rain a year, much of it in heavy bursts. Smaller, simple rooflines can still work well with 5-inch, and we will tell you if that is your house.
How long does gutter installation take?
One day for most single-family homes. We measure, form the seamless runs on site, hang and pitch them, fit downspouts, and water-test before a final walkthrough with you. Homes needing fascia repair may take a second day.
Do seamless gutters really leak less?
Yes. Each seamless run is one piece of metal, so joints exist only at corners and outlets. Sectional gutters have a sealed joint every 10 feet, and those joints are where most leaks start as sealant ages in Gulf heat.
What areas of Biloxi do you serve?
All of Biloxi, MS: Downtown and Old Biloxi, East Biloxi, West Biloxi, Edgewater Park, North Biloxi, and Woolmarket, in ZIP codes 39530, 39531, and 39532.
Do you repair gutters, or only install new ones?
Both. We reseal leaking corners, re-pitch and re-hang sagging runs, replace damaged sections, and handle storm damage. When repairs stop making financial sense, we will say so and show you why.
How do I get an estimate?
Call (228) 888-8061 or use the contact form. We visit, measure, check the fascia, and leave a written estimate with the full price. There is no obligation to book.
More answers live on our Biloxi gutter FAQ page.
Get a gutter system sized for Biloxi rain
One call gets you a measurement, straight sizing advice, and a written estimate.
Call (228) 888-8061When you are ready for gutter installation in Biloxi, MS that starts with a tape measure instead of a sales pitch, call (228) 888-8061.